Easy  To Use And Sturdy

• Easy To Use And Sturdy
  The light weight, strong and safe design bring up operation efficiency with little fatigue to the operation.
• Guarantee
  The adjustable wrenches, 45 degrees double offset wrenches, 60 degrees single offset wrenches, and super head spanners have had life-time guarantees for over twenty years.When manufacturing the other products we are always in pursuit of perfection.

• Safe Design
  The 60 degrees single offset wrenches, HS sockets, super tongs and pipes wrenches have a safety first design. The lifting clamps have safety factors of 5 times and all products are tested at 3 times their capacities.
• Screw Section
  The screw sections of the C-clamp, and pullers which come under stress will have a 30 degrees trapezoid fine thread for easy light operation. To lower the friction the screw will also have the phosphoric acid manganese film forming treatment.
• Material
  Basic material of the Super Tools is special alloy steel, precisely heat treated. Some products for different uses will use materials other than the special alloy steel.
  
  Click Here For Safety & Correct Operation Of Tools !
  For More Informations Please Email Us !

• H.S.S. (8% Coblat) TWO FLUTES END MILLS, with Outside Threads Helical Flute 30°, Short Length (TS2) / Long Length (Tl2)
• H.S.S/ (8% Cobalt) MULTIPLE FLUTES END MILLS, with Outside Threads Helical Flute 30°, Short Length (TSM) / Long Length (TLM)
• H.S.S/ (8% Cobalt) ROUGHING END MILLS, with Outside Threads Short Length (TSR) / Long Length (TLR)
• H.S.S/ (8% Cobalt) NICK BLADE TYPE MILLS, with Outside Threads Helical Flute 30°, Short Length (TSN)

• H.S.S/ (8% Cobalt) BALL END MILLS, with Outside Threads Helical Flute 30°, Short Length (TSB)
• H.S.S/ (8% Cobalt) THREE FLUTES END MILLS, with Outside Threads Helical Flute 30°, Short Length (TS3)
• H.S.S/ (8% Cobalt) TWO END MILLS, Cylindrical Shank Helical Flute 30°, Short Length (CS2) / Long Length (CL2)
• H.S.S/ (8% Cobalt) FOUR FLUTS END MILLS, Cylindrical Shank Helical Flute 30°, Short Length (CS4) / Long Length (CL4)
  
  For More Informations Please Email Us !

INDUSTRIAL POWER BRUSHES

Power brushes are rotating tools used for finishing and cleaning, surfaces and for deburring. The wire material improves the surface without removing material. The silicon carbide impregnated nylon filament brushes remove microscopically fine particles.

Fields of Application :

• For Deburring, in particular for removing secondary burrs resulting from milling grinding, turning and drilling.
• For Cleaning Surfaces
  - Removing rust, scale
  - Cleaning
  - Removing paint
  - Processing welding seams
• For Surface Processing
  - Matt finishing, burnishing
  - Roughening
  - Texturing
  - Grinding (with SiC filament)
• For Metals, Plastics, Wood, etc

• Manually With
  - Drills
  - Flexible shafts
  - Straight and angle grinders with air or electrical motors
• Stationary Use
• Robot-Guided Use
  - Mainly custom designs

• Long service life thanks to high-quality special wire with high flexibility and flexural strength.
• High concentricity thanks to even distribution and secure anchoring of the fill material.
• Optimum surfaces, thanks to close matching of brush body and trim length.
• Attractive price/performance ration.

Type A ( Aluminium Oxide ) :
The laminas holding the abrasive grain are arranged like a fan around the shaft to irregular surfaces. The abrasive grain is securely surfaces. The abrasive grain is securely bonded with heavy-duty resins. Best results are achieved when run at high speed.

Applications :

• Fine grinding work on large irregular surfaces in tool and mould making
• Working in smaller and difficult to reach areas in tank construction and apparatus engineering.
• Available with threaded bushing on request.

Flap Wheels are design for grinding flat or irregular surfaces. Because of their softness and flexibility, the coated abrasive laminas adapt easily to the work-piece.

Fields of Application:
Good finishing of flat, concave and convex surfaces. Internal grinding and non-ferrous metals.

Drives:
Hand tools and stationary machines e.g. flexible shaft machines or floor stand grinders. A power drive of 1500 watts minimum is require.

Tips of Use:
Flap wheels can be used either dry or with oil. At lower speed use less working pressure. Excessive pressure should not be used as this can damage the laminas. When working with feed, the rotating directions tool/work-piece should be opposite. The same rotating direction will cause the grinding performance to be neutralized and the wheel to be destroyed. Flap wheels are mounted with two clamping flanges.

For More Informations Please Email Us !